Articles

Technical Help

Technical aspects of ignition systems

Smart-Fire Technical Help
Sunday, September 11, 2011
NO SPARKCheck battery has power.Switch on headlamp, this should stay bright for at least one minute.BATTERY IS OK, BUT STILL NO SPARK - CHECK FOR POWER TO THE IGNITION MODULEUsing a test bulb or voltmeter/multimeter, check for a good power feed into the ignition module.The power feed is the wire coming from the ignition or kill switch.Measure between this ignition feed wire and ground, with... [MORE]


SURE-FIRE FAULT FINDING
Wednesday, January 31, 2007
NO SPARKCheck battery has power.Switch on headlamp, this should stay bright for at least one minute.BATTERY IS OK, BUT STILL NO SPARK - CHECK FOR POWER TO THE IGNITION MODULEUsing a test bulb or voltmeter/multimeter, check for a good power feed into the ignition module.The power feed is the wire coming from the ignition or kill switch.Measure between this ignition feed wire and ground, with... [MORE]